How Rescue Legislation Impacts on You and Your Company


Impact of Rescue Legislation

It may come as a shock to some that their workers face considerable danger after a fall. As a result many companies are lacking a “thought-out, detailed and fully implemented rescue plan.”

Harnesses can become deadly whenever a worker is suspended for durations over five minutes in an upright posture, with the legs relaxed straight beneath the body. After five minutes they will likely be unconscious, by 10 minutes there is a strong possibility that their brain and other organs will begin to fail or even death occur due to lack of oxygen as blood is prevented from circulating. The cause of this problem is called ’suspension trauma’.

It is now a legal requirement to have a rescue plan.

In general, whether it is construction or general industry, employers are not really prepared for rescue, though they probably would say they are. The best rescue strategy is to take every possible precaution to prevent operatives from falling in the first place.

But the reality is that falls happen, even on the work sites of the most safety conscious employers, and a rescue plan is an essential component of a company’s overall fall protection method statement and risk assessment. The lack of any form of a pre-conceived post-fall rescue plan, not only puts the fall victim at risk, but also puts rescuers in harms way. Whenever you have unplanned attempts to rescue, second or third injuries or fatalities are not uncommon.

It is with these issues in mind that the HSE introduced The Work at Height Regulations: 2005

Are you breaking the law on your sites without knowing it?

Before any work at height can commence on site the following provisions must be in place as a minimum legal requirement:
· There must be a rescue plan and procedure
· The operatives are trained and competent in use of rescue equipment
· Sufficient number of trained and competent personnel on site
· The rescue procedure in place is practiced on a regular basis and competence is maintained on record
· The selection of rescue equipment needs to be appropriate for the nature of work

3 Things You Must Do To Comply With Legislation and Discharge Your Legal Responsibilities.

1. Plan For Rescue - You need to prepare a well thought out plan. It doesn’t need to be complex but it does need to be detailed. This should be done following a risk assessment and embodied in a Method Statement.
The HSE says” If a person falls while using a fall arrest system, it is not acceptable just to rely on the emergency services, it needs to be covered in the risk assessment and planned prior to the work activity being carried out.” Often we think of the word ‘rescue’ as calling 999, but calling the local fire brigade does not constitute an effective rescue plan. Response times can be too slow, and not all fire brigades have the capability to rescue from height. Equally ‘crane man baskets’ and ‘MEWPS’ are too restrictive to be considered adequate for rescue.

2. Provide Rescue Equipment - The rescue equipment selection should have been an integral part of planning. It’s important that the equipment is easy to use and fast to deploy as time is a critical element and it goes without saying that the equipment must be there, on site, ready for use.

3. Training and Practice - Legislation requires that those working at height must be competently trained to rescue. Safety of the casualty and the rescuers is paramount and training for all eventualities is essential as is the need to practice and keep records of competence.

Rescue occurs in an environment of tension, pressure and stress, what would happen on your site following a fall? Would rescue be carried out in an orderly way, with the correct response, or would there be a degree of panic and chaos.

Ultimately legislation is there to provide the correct framework and guidance to ensure the adequate care and wellbeing of operatives on site.

For more information visit: http://www.leadingedgesafety.co.uk/at-height-rescue-gs.php

working at height

working at height training

How Does Rescue Legislation Impact on You and Your Company

Author: Drew Beardmore
Managing Director Leading Edge Safety

Leading Edge Supplies are providers of Working at Height Rescue Training and Equipment. Training courses are available for operatives and management levels. Leading edge guarantees operatives trained on their equipment will be able to carry out a rescue on both conscious and unconscious casualties in less than five minutes.

For more information visit: http://www.leadingedgesafety.co.uk/at-height-rescue-gs.php

Popularity: 5% [?]

Comments are closed.

Guidance Podcasts
Harness Articles
At Height Training
  • HSE publications translated – Information and advice in world languages
    HSE welcomes people of all nationalities and ethnic backgrounds to its web site. If you are looking for information, help or guidance a number of publications have been translated into languages other than English. HSE publications translated – Information and advice in world languages […]
  • Quarry firm fined after worker plunge in 30-tonne wheel loader
    A quarry operator was today fined £30,000 after a 30-tonne wheel loader vehicle overturned and slid almost 16ft down a sand stockpile. Humberside Aggregates and Excavations Ltd, of Newport Road, North Cave, East Yorkshire, was also ordered to pay £10,590 in costs after pleading guilty to three separate breaches of Quarries Regulations 1999 in the prosecution […]
  • HSE targets ageing installations with new offshore inspection programme
    A new inspection programme of offshore oil and gas installations on the UK continental shelf is underway to ensure that ageing infrastructure does not adversely affect safety. After 40 years of oil and gas production in the UK sector of the North Sea, more than half of fixed platforms have exceeded their original design life or [...] […]
  • RR819: A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines
    This report was carried out in support of HSE’s FIT3 Disease Reduction Programme Cancer Project’s aim to develop a strategy to reduce the incidence of occupational cancer in Great Britain. RR819 – A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines […]
  • Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles
    This SIM provides guidance to inspectors on exposure to MbOCA and isocyanates in the manufacture of moulded polyurethane articles. View SIM 03/2010/07 – Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles […]
  • Buncefield prosecution – HSE podcast July 2010
    In this episode: We talk to HSE’s Deputy Chief Executive, Kevin Myers, about the prosecution of five companies held responsible for the explosion at Buncefield Oil Storage Depot in 2005. Buncefield prosecution – HSE podcast July 2010 […]
  • FAQs – Do employers have to provide personal protective equipment?
    The relevant regulations are the Personal Protective Equipment at Work Regulations 1992. Regulation 4 states: Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work. Listen to HSE’s Infoline answer this question […]
  • Publication of HSE Annual Report and Accounts 2009/10
    The Annual Report reports on delivery of the HSE Business Plan 2009/10 together with other key developments in the organisation during the year. The Accounts include operating costs, recognised gains and losses, cash flows and a statement of financial position for HSE at 31 March 2010. View the HSE Annual Report and Accounts 2009/10 […]
  • Advice on acceptance criteria for damaged passive fire protection coatings on offshore installations
    This SPC introduces Offshore Information Sheet 12/2007, which provides guidance for evaluating the condition of passive fire protective coatings found offshore, and prioritising any repair action required. Feedback on issues raised as a result of inspections would be welcomed by OSD3.2. This SPC replaces SPC/Tech/OSD/36, which has been withdrawn. Advice on a […]
  • Riser emergency shut down valve (ESDV) leakage assessment
    This document describes how HSE assesses the acceptability of riser emergency shutdown valve (ESDV) leakage rates. This SPC replaces SPC/Tech/OSD/26 which has been withdrawn. Riser emergency shut down valve (ESDV) leakage assessment – view this document in full […]
  • Good and best practice offshore – collection of examples
    OSD need to identify and collect examples of good and best practice from regulatory interventions offshore. This SPC advises how this will be done. Good and best practice offshore – collection of examples view this document in full […]
  • Focus on…Serious accident on spindle moulder
    A worker making glazing beads on a spindle moulder received serious injuries to his hand, including amputations, when it went into the cutters as a result of a kickback. There was no false fence, tunnel guard or power feed fitted, so all the cutter block was exposed. The injuries were made much worse as ‘old style’ [...] […]
  • Operational circulars on REACH. OC 253/11, OC 253/12 and OC 253/13
    OC 253/11 – REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) – Guidance on the Regulation Read circular OC 253/11 OC 253/12 – Arrangements for the enforcement of REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Read circular OC 253/12 OC 253/13 – Guidance on the interaction between COSHH and REACH ( […]
  • Worker loses lower leg after paving machine crush
    A Somerset construction firm has today been fined £10,000 after a worker’s foot was crushed under a paving machine – and he had to have his lower leg amputated. HSE prosecuted John Wainwright & Co Ltd for its role in the incident on School Road, Monkton in Heathfield on 29 August 2008. View press release ‘Worker loses [...] […]
  • Construction company put workers at risk of falls
    A major construction company has been fined today for failing to properly protect its workers from falls at height on a site in South Wales. Gee Construction Ltd was the principal contractor on the site at Castlegate, Caerphilly when a HSE inspector visited on 22 October 2009. View press release ‘Construction company put workers at risk of [...] […]
  • Castle Bromwich firm fined after worker injured by robot
    A Birmingham automotive firm has been fined after one of its employees was struck by a manufacturing robot, leaving his voice box damaged and almost paralysing him down one side of his body. HSE prosecuted Castle Bromwich-based Dura Automotive Body and Glass Systems UK yesterday (Wednesday) and the company was fined £30,000 and ordered to pay [...] […]
  • Noise ebulletin – free news and updates
    Subscribe today, receive a free email detailing the latest news and developments on the noise website. Latest ebulletin: Noise Podcast, HSE’s Pete Lennon talks about tackling the risks from noise and vibration in the workplace. Noise ebulletin – free news and updates […]
  • RR818 – Follow up evaluation of HSE’s web based Work-Related Violence Toolkit
    This project is the second phase of the evaluation of the ‘Managing violence in licensed and retail premises’ toolkit. The toolkit is aimed at duty holders in licensed and retail premises and is also intended as a resource for Local Authority inspectors. The HSE was interested in collecting feedback about the toolkit from people who had [...] […]
  • FAQs – When do the CDM Regulations 2007 apply to a project?
    The Construction, Design and Management (CDM) 2007 Regulations apply to most common building, civil engineering and engineering construction work. You must notify HSE of the site if the construction work is expected to either last longer than 30 days or involve more than 500 person days of construction work. Listen to HSE’s Infoline answer this question […]
  • HSE Chair’s speech at NEBOSH Graduation
    HSE Chair Judith Hackitt’s speech at the National Examination Board in Occupational Safety and Health graduation, 28 June 2010 View transcript of HSE Chair’s speech at NEBOSH Graduation […]