Ladder and Step Ladder Safety


 

Ladder Safety Guidance

There are some 15 fatal accidents at work every year involving ladders in the UK and there are 3800 major injuries.

 What excuse would you make if an untrained employee died or was seriously injured falling from a ladder?

Falls from height are the number one cause of workplace deaths and one of the main causes of major injury in the workplace. Almost a third of falls are from ladders.

Accidents involving ladders are all too common, and most businesses have at least one ladder.

The cause is often simple. The ladder slips or tilts at the top, or slips outwards at the base. In some cases, part of the ladder fails due to its poor condition. Gravity means you only go one way. And it’s not the fall that hurts but the impact with the ground.

Many companies have experience of such accidents. They happen during routine production activities, maintenance activities, building repair or cleaning work, accessing plant etc.

 

Is there a responsibility of management to provide safety training for those climb ladders?

Yes, the current Health and safety legislation ‘The Work at Height Regulations: 2005 says

All those working at height need to be trained to work at height and this includes working on ladders and step ladders.

 

A New Law April 6th. 2008

Corporate Manslaughter and Corporate Homicide Act 2007

Corporate manslaughter is a crime that is committed by a company in relation to a work-related death.

The Corporate Manslaughter and Corporate Homicide Act will be implemented on April 6, 2008 and will affect all companies regardless of size. The new law will mean that, organisations can be prosecuted where a safety failure is the cause of work-related deaths.

 

The new test

Juries will consider how the fatal activity was managed or organised throughout the organisation, including any systems and processes for managing safety and how these were operated in practice.

 

Duty of care

A duty of care exists for example in respect of the systems of work and equipment used by employees.

If found guilty an organisation could be ordered to:

  •  Pay an unlimited fine
  •  Take remedial action within a specified period
  •  Publicise nationally full detail of their conviction (at the organisation cost) including size of fine and remedial action

 

Now more than ever good management needs to be proactive in developing safe systems and methods of work.

With this in mind Leading Edge have developed a “My Ladder Safety” course suitable for all those who have a requirement to climb and work from ladders and step ladders.

Ladders and step ladders are an essential tool within the work place.

Leading Edge has developed a training course which is applicable for all industry sectors and places of work. The course has been carefully devised in line with the latest studies and research to address the following fundamental issues:

  •  Why accidents are happening?
  •  Fundamental principals’ including a look at Ladder types and their applications.
  •  Accessories currently on the market which can make ladder safer
  •  Pre use considerations including, positioning and stability
  •  Good and bad practice
  •  Golden rules for safe use of ladders and step ladders
  •  HSE research and good practice new requirements
  •  Written Exam
  •  Practical session

The key strength of the course is its method of delivery; highly visual in nature it includes numerous illustrations and photographs. Our instructors energetically deliver the course and encourage group interaction. We have found this to be a particularly effective way for the course to be enjoyable, and more importantly to ensure the key information is retained.

 

 Why use us Leading Edge

  •  5000 plus people every year go through Leading Edge training
  •  We have won local government awards for innovation
  •  90% of people come to us via referral from happy customers
  •  Provide onsite post training aftercare service for free
  •  We are recognised for employing the very best instructors
  •  All our courses are highly evolved in both content and delivery methods to maximise information retention
  •  We are driven not to just to be better than our competition but to continually pioneer ideas and technology, forging higher standards that the industry follows in both products and training
  •  As a privately owned business where every person is passionate and dedicated about what we do, ensuring we stay at the top of our game

 

What this means to you is:

  •  The best training available today
  •  Interesting and easily absorbable subject matter
  •  High levels of retention
  •  Motivated and safe workers
  •  Good record of safe working and the peace of mind that goes with that.

 

With more than 50 years of experience in technical height safety training and products, we have determined not only to provide the best fall protection and height safety training possible, but to also continuously develop new ideas, further our technological expertise, understand and implement new techniques and to repeatedly set higher standards of ladder and stepladder safety training

Popularity: 15% [?]

Comments are closed.

Guidance Podcasts
Harness Articles
At Height Training
  • HSE publications translated – Information and advice in world languages
    HSE welcomes people of all nationalities and ethnic backgrounds to its web site. If you are looking for information, help or guidance a number of publications have been translated into languages other than English. HSE publications translated – Information and advice in world languages […]
  • Quarry firm fined after worker plunge in 30-tonne wheel loader
    A quarry operator was today fined £30,000 after a 30-tonne wheel loader vehicle overturned and slid almost 16ft down a sand stockpile. Humberside Aggregates and Excavations Ltd, of Newport Road, North Cave, East Yorkshire, was also ordered to pay £10,590 in costs after pleading guilty to three separate breaches of Quarries Regulations 1999 in the prosecution […]
  • HSE targets ageing installations with new offshore inspection programme
    A new inspection programme of offshore oil and gas installations on the UK continental shelf is underway to ensure that ageing infrastructure does not adversely affect safety. After 40 years of oil and gas production in the UK sector of the North Sea, more than half of fixed platforms have exceeded their original design life or [...] […]
  • RR819: A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines
    This report was carried out in support of HSE’s FIT3 Disease Reduction Programme Cancer Project’s aim to develop a strategy to reduce the incidence of occupational cancer in Great Britain. RR819 – A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines […]
  • Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles
    This SIM provides guidance to inspectors on exposure to MbOCA and isocyanates in the manufacture of moulded polyurethane articles. View SIM 03/2010/07 – Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles […]
  • Buncefield prosecution – HSE podcast July 2010
    In this episode: We talk to HSE’s Deputy Chief Executive, Kevin Myers, about the prosecution of five companies held responsible for the explosion at Buncefield Oil Storage Depot in 2005. Buncefield prosecution – HSE podcast July 2010 […]
  • FAQs – Do employers have to provide personal protective equipment?
    The relevant regulations are the Personal Protective Equipment at Work Regulations 1992. Regulation 4 states: Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work. Listen to HSE’s Infoline answer this question […]
  • Publication of HSE Annual Report and Accounts 2009/10
    The Annual Report reports on delivery of the HSE Business Plan 2009/10 together with other key developments in the organisation during the year. The Accounts include operating costs, recognised gains and losses, cash flows and a statement of financial position for HSE at 31 March 2010. View the HSE Annual Report and Accounts 2009/10 […]
  • Advice on acceptance criteria for damaged passive fire protection coatings on offshore installations
    This SPC introduces Offshore Information Sheet 12/2007, which provides guidance for evaluating the condition of passive fire protective coatings found offshore, and prioritising any repair action required. Feedback on issues raised as a result of inspections would be welcomed by OSD3.2. This SPC replaces SPC/Tech/OSD/36, which has been withdrawn. Advice on a […]
  • Riser emergency shut down valve (ESDV) leakage assessment
    This document describes how HSE assesses the acceptability of riser emergency shutdown valve (ESDV) leakage rates. This SPC replaces SPC/Tech/OSD/26 which has been withdrawn. Riser emergency shut down valve (ESDV) leakage assessment – view this document in full […]
  • Good and best practice offshore – collection of examples
    OSD need to identify and collect examples of good and best practice from regulatory interventions offshore. This SPC advises how this will be done. Good and best practice offshore – collection of examples view this document in full […]
  • Focus on…Serious accident on spindle moulder
    A worker making glazing beads on a spindle moulder received serious injuries to his hand, including amputations, when it went into the cutters as a result of a kickback. There was no false fence, tunnel guard or power feed fitted, so all the cutter block was exposed. The injuries were made much worse as ‘old style’ [...] […]
  • Operational circulars on REACH. OC 253/11, OC 253/12 and OC 253/13
    OC 253/11 – REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) – Guidance on the Regulation Read circular OC 253/11 OC 253/12 – Arrangements for the enforcement of REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Read circular OC 253/12 OC 253/13 – Guidance on the interaction between COSHH and REACH ( […]
  • Worker loses lower leg after paving machine crush
    A Somerset construction firm has today been fined £10,000 after a worker’s foot was crushed under a paving machine – and he had to have his lower leg amputated. HSE prosecuted John Wainwright & Co Ltd for its role in the incident on School Road, Monkton in Heathfield on 29 August 2008. View press release ‘Worker loses [...] […]
  • Construction company put workers at risk of falls
    A major construction company has been fined today for failing to properly protect its workers from falls at height on a site in South Wales. Gee Construction Ltd was the principal contractor on the site at Castlegate, Caerphilly when a HSE inspector visited on 22 October 2009. View press release ‘Construction company put workers at risk of [...] […]
  • Castle Bromwich firm fined after worker injured by robot
    A Birmingham automotive firm has been fined after one of its employees was struck by a manufacturing robot, leaving his voice box damaged and almost paralysing him down one side of his body. HSE prosecuted Castle Bromwich-based Dura Automotive Body and Glass Systems UK yesterday (Wednesday) and the company was fined £30,000 and ordered to pay [...] […]
  • Noise ebulletin – free news and updates
    Subscribe today, receive a free email detailing the latest news and developments on the noise website. Latest ebulletin: Noise Podcast, HSE’s Pete Lennon talks about tackling the risks from noise and vibration in the workplace. Noise ebulletin – free news and updates […]
  • RR818 – Follow up evaluation of HSE’s web based Work-Related Violence Toolkit
    This project is the second phase of the evaluation of the ‘Managing violence in licensed and retail premises’ toolkit. The toolkit is aimed at duty holders in licensed and retail premises and is also intended as a resource for Local Authority inspectors. The HSE was interested in collecting feedback about the toolkit from people who had [...] […]
  • FAQs – When do the CDM Regulations 2007 apply to a project?
    The Construction, Design and Management (CDM) 2007 Regulations apply to most common building, civil engineering and engineering construction work. You must notify HSE of the site if the construction work is expected to either last longer than 30 days or involve more than 500 person days of construction work. Listen to HSE’s Infoline answer this question […]
  • HSE Chair’s speech at NEBOSH Graduation
    HSE Chair Judith Hackitt’s speech at the National Examination Board in Occupational Safety and Health graduation, 28 June 2010 View transcript of HSE Chair’s speech at NEBOSH Graduation […]