After the fall – Rescue at Height


Working at Height Rescue

After the fall – Suspension Trauma / orthostatic intolerance – the need for a plan to rescue  a fallen operative

Leading Edge stresses the importance of thorough planning for rescue

Planning for rescue and emergencies when employees work at height is a legal and moral responsibility for all employers.

Regulation 4(1) of the Work at Height Regulations 2005 obliges employers to ensure all work at height is properly planned, and Regulation 4(2) notes that “planning of work includes planning for emergencies and rescue”.

Often we think of rescue as simply a matter of dialling 999, but calling the local fire brigade does not add up to an effective rescue plan. Response times can be too long and not all brigades have the capability to rescue from height.

Even in the most safety conscious employers’ workplaces accidents happen, so a rescue plan is an essential component of working at height and should be managed via a working at height method statement and risk assessment, and be ingrained through training and practice.

The absence of any form of post-fall rescue plan – relying on employees to improvise the rescue of a colleague – not only puts the victim at risk, but also puts rescuers in harm’s way. Unplanned attempts at rescue often result in secondary and tertiary injuries or deaths.

In intense, stressful and life threatening situations many individuals will suffer an onset of panic after the initial adrenaline rush. A panicked state damages the thought processes and the affected person will be unable to make logical or considered decisions. This puts both the casualty and the rescuer at risk as the panic can interfere with the rescue operation.
In fact, the number of people who are killed or injured as a result of trying to help a colleague or friend who has fallen from height almost exceeds the number of original casualties. This is why adequate operative training is essential not only for those who have fallen from height but also for the operatives attempting the rescue.

Time is short
The reason planned rescue by trained people is so important is that the danger is far from over when the fall arrest equipment does its job. Anyone hanging in a harness is at risk of suspension trauma; as the blood drains from the top half of their body, depriving the brain of oxygen. The critical thing is to get them to the ground as quickly as possible – any more than 10 minutes in suspension and the risk of irreparable damage increases rapidly.

The rescue plan must provide for self-rescue by employees who remain conscious after a fall, where their equipment allows them to get to safety. Workers must be trained and practised in self rescue.
But even where a fallen worker appears to be able to help themselves, the plan must require colleagues to act as though they are incapable, since the situation might change and time is at a premium.

The plan must give clear direction for anyone who witnesses a fall to know who on site at the time is responsible for rescue and to alert them immediately, plus the emergency services where available. This means ensuring every worker has emergency phone numbers to hand and knows the site location to direct third parties.

The plan must set out the hierarchy of rescue options available on site for getting employees to safety – from dedicated rescue equipment, such as additional harnesses, controlled descent devices, winches and hauling devices, to retrieve the fallen worker, plus locations of first aid equipment and any rescue-specific items.

Though speed is of the essence, the plan must make co-workers responsibilities clear and emphasise the importance of not endangering themselves during the rescue.

Death by Rescue
It used to be thought (following industry research) that as the casualty is returned to the level, the fallen worker must not be laid flat because of the risk of stale blood from the legs rushing back through the body poisoning their major organs and causing potentially fatal toxic shock. Operatives were encouraged to put the casualty into a sitting “W” position with their legs bent, unless they are suspected of having a spinal injury.
The HSE following further research has clarified their guidance on the treatment of a casualty following a fall and having been suspended by a harness and may have developed suspension trauma. The HSE recommendation now is:
“Not to place casualty in the “W” position, but to place the casualty in a horizontal position.”

Other Considerations
Other considerations for a plan include how to ensure any wreckage/equipment is set aside to help later investigation, allowing for unusual structural features that might complicate a rescue and ensuring materials are provided in translation where large numbers of migrant workers are on site.

However well thought out, a rescue plan (like a risk assessment) is useless if it is filed away and forgotten. You need to ensure that everyone who could be involved in a rescue: managers; supervisors; and workers are fully trained in the types of situation that might call for a rescue, what their roles are and how to use the equipment you provide.
Rescue operations are carried out under extreme pressure, whatever training your employees have had or are yet to have, will determine how they react.
The training should be kept topped up with regular practice sessions or drills, keeping employees on their toes but also checking that they can act inside the necessary ten-minute window. Just as the plan needs updating with any change of circumstances, personnel or equipment, so does the training.

Being aware of the demands for fast, simple and effective rescue,when working at height Leading Edge Safety have developed a range of products and courses specifically designed for working at height rescue allowing typical workers to rescue conscious and unconscious casualties in under ten minutes. For more information and guidance on working at height and rescue from height visit working at height rescue

working at height

working at height training

height safety training

Popularity: 6% [?]

Comments are closed.

Guidance Podcasts
Harness Articles
At Height Training
  • HSE publications translated – Information and advice in world languages
    HSE welcomes people of all nationalities and ethnic backgrounds to its web site. If you are looking for information, help or guidance a number of publications have been translated into languages other than English. HSE publications translated – Information and advice in world languages […]
  • Quarry firm fined after worker plunge in 30-tonne wheel loader
    A quarry operator was today fined £30,000 after a 30-tonne wheel loader vehicle overturned and slid almost 16ft down a sand stockpile. Humberside Aggregates and Excavations Ltd, of Newport Road, North Cave, East Yorkshire, was also ordered to pay £10,590 in costs after pleading guilty to three separate breaches of Quarries Regulations 1999 in the prosecution […]
  • HSE targets ageing installations with new offshore inspection programme
    A new inspection programme of offshore oil and gas installations on the UK continental shelf is underway to ensure that ageing infrastructure does not adversely affect safety. After 40 years of oil and gas production in the UK sector of the North Sea, more than half of fixed platforms have exceeded their original design life or [...] […]
  • RR819: A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines
    This report was carried out in support of HSE’s FIT3 Disease Reduction Programme Cancer Project’s aim to develop a strategy to reduce the incidence of occupational cancer in Great Britain. RR819 – A small survey of exposure to rubber process dust, rubber fume and N-nitrosamines […]
  • Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles
    This SIM provides guidance to inspectors on exposure to MbOCA and isocyanates in the manufacture of moulded polyurethane articles. View SIM 03/2010/07 – Workyear 2010/2011: Inspection of premises using MbOCA and isocyanates in the manufacture of moulded polyurethane articles […]
  • Buncefield prosecution – HSE podcast July 2010
    In this episode: We talk to HSE’s Deputy Chief Executive, Kevin Myers, about the prosecution of five companies held responsible for the explosion at Buncefield Oil Storage Depot in 2005. Buncefield prosecution – HSE podcast July 2010 […]
  • FAQs – Do employers have to provide personal protective equipment?
    The relevant regulations are the Personal Protective Equipment at Work Regulations 1992. Regulation 4 states: Every employer shall ensure that suitable personal protective equipment is provided to his employees who may be exposed to a risk to their health or safety while at work. Listen to HSE’s Infoline answer this question […]
  • Publication of HSE Annual Report and Accounts 2009/10
    The Annual Report reports on delivery of the HSE Business Plan 2009/10 together with other key developments in the organisation during the year. The Accounts include operating costs, recognised gains and losses, cash flows and a statement of financial position for HSE at 31 March 2010. View the HSE Annual Report and Accounts 2009/10 […]
  • Advice on acceptance criteria for damaged passive fire protection coatings on offshore installations
    This SPC introduces Offshore Information Sheet 12/2007, which provides guidance for evaluating the condition of passive fire protective coatings found offshore, and prioritising any repair action required. Feedback on issues raised as a result of inspections would be welcomed by OSD3.2. This SPC replaces SPC/Tech/OSD/36, which has been withdrawn. Advice on a […]
  • Riser emergency shut down valve (ESDV) leakage assessment
    This document describes how HSE assesses the acceptability of riser emergency shutdown valve (ESDV) leakage rates. This SPC replaces SPC/Tech/OSD/26 which has been withdrawn. Riser emergency shut down valve (ESDV) leakage assessment – view this document in full […]
  • Good and best practice offshore – collection of examples
    OSD need to identify and collect examples of good and best practice from regulatory interventions offshore. This SPC advises how this will be done. Good and best practice offshore – collection of examples view this document in full […]
  • Focus on…Serious accident on spindle moulder
    A worker making glazing beads on a spindle moulder received serious injuries to his hand, including amputations, when it went into the cutters as a result of a kickback. There was no false fence, tunnel guard or power feed fitted, so all the cutter block was exposed. The injuries were made much worse as ‘old style’ [...] […]
  • Operational circulars on REACH. OC 253/11, OC 253/12 and OC 253/13
    OC 253/11 – REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) – Guidance on the Regulation Read circular OC 253/11 OC 253/12 – Arrangements for the enforcement of REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Read circular OC 253/12 OC 253/13 – Guidance on the interaction between COSHH and REACH ( […]
  • Worker loses lower leg after paving machine crush
    A Somerset construction firm has today been fined £10,000 after a worker’s foot was crushed under a paving machine – and he had to have his lower leg amputated. HSE prosecuted John Wainwright & Co Ltd for its role in the incident on School Road, Monkton in Heathfield on 29 August 2008. View press release ‘Worker loses [...] […]
  • Construction company put workers at risk of falls
    A major construction company has been fined today for failing to properly protect its workers from falls at height on a site in South Wales. Gee Construction Ltd was the principal contractor on the site at Castlegate, Caerphilly when a HSE inspector visited on 22 October 2009. View press release ‘Construction company put workers at risk of [...] […]
  • Castle Bromwich firm fined after worker injured by robot
    A Birmingham automotive firm has been fined after one of its employees was struck by a manufacturing robot, leaving his voice box damaged and almost paralysing him down one side of his body. HSE prosecuted Castle Bromwich-based Dura Automotive Body and Glass Systems UK yesterday (Wednesday) and the company was fined £30,000 and ordered to pay [...] […]
  • Noise ebulletin – free news and updates
    Subscribe today, receive a free email detailing the latest news and developments on the noise website. Latest ebulletin: Noise Podcast, HSE’s Pete Lennon talks about tackling the risks from noise and vibration in the workplace. Noise ebulletin – free news and updates […]
  • RR818 – Follow up evaluation of HSE’s web based Work-Related Violence Toolkit
    This project is the second phase of the evaluation of the ‘Managing violence in licensed and retail premises’ toolkit. The toolkit is aimed at duty holders in licensed and retail premises and is also intended as a resource for Local Authority inspectors. The HSE was interested in collecting feedback about the toolkit from people who had [...] […]
  • FAQs – When do the CDM Regulations 2007 apply to a project?
    The Construction, Design and Management (CDM) 2007 Regulations apply to most common building, civil engineering and engineering construction work. You must notify HSE of the site if the construction work is expected to either last longer than 30 days or involve more than 500 person days of construction work. Listen to HSE’s Infoline answer this question […]
  • HSE Chair’s speech at NEBOSH Graduation
    HSE Chair Judith Hackitt’s speech at the National Examination Board in Occupational Safety and Health graduation, 28 June 2010 View transcript of HSE Chair’s speech at NEBOSH Graduation […]