Plant and Machinery Fall Arrest Training

Who is this course for

The Plant & Machinery Height Safety training course is designed for anyone working with plant and machinery, whether operating, servicing, or managing and controlling the use of equipment.

This course focuses on how to tackle working at height on plant and machinery, incorporating the use of height safety equipment where necessary, working in the safest way possible depending on the specific work applications and access requirements.

The ability to work efficiently at height whilst navigating the hazards associated with plant and machinery depends on the level of confidence, ability to work safely, and the ease with which operatives can use the equipment in the given situation.

During these typical activities where physically climbing on the plant is involved, can put the operator at the risk of falling when working at height and therefore comes under the legal requirements and duties of the work at height regulations.

The candidates having passed the course exam will be certificated competent to work safely at height on plant and machinery.

On-site training is the key to reducing disruption and minimising lost time for employers. It also allows Leading Edge to apply specific training and advice relative to your actual workplace.

Booking

For Group Booking details see pricing tab above

Please call on 01329 827 997 for next available dates or email: shirley@leadingedgesafety.co.uk

For more detailed information regarding this course please see above tabs

Basic concepts such as the critical importance of correct harness fitting, how to use specific equipment providing necessary levels of access, understanding anchorage requirements and suitability when working on plant, along with general height safety knowledge on what you can and can’t do when working at height on plant and what you can and can’t use when it comes to equipment and suitability for the given application.

Delegates look at the specific access needed, anchorage arrangements, and the equipment suitability for the following machines:

• Dump truck below 10 tons and above 10 tons
• Excavator 360’s below 10 tons and above 10 tons
• Truck mounted, crawler, wheeled and tower cranes
• Dragline
• Truck mounted boom concrete pumps, and trailer mounted
• Rough terrain, industrial counterbalance, telescopic forklifts
• Reach trucks
• Graders
• Hoists
• Wheeled shovel loaders
• Tracked loading shovels
• Skid steer loaders
• Piling rigs
• Trenchers
• Skip handlers
• Crushers
• Screeners
• Road rail excavator/cranes

What makes this Plant and Machinery course different?

This working at height training course has been developed through our extensive knowledge and experience of plant and machinery, understanding the scope of work undertaken on different equipment, the relative exposure, available access, and the capability of the typical operator. We have specialist instructors holding plant operators licenses and qualified plant and machinery instructors under NPORS ,CITB, and IPAF. The instructors are also senior Leading Edge height safety instructors, making Leading Edge and this course unique.

We train at your location, in real working conditions, solving real on the job problems associated with plant and machinery service access. Our course’s major strength lies in their direct association with the plant on which the candidates are working.

On-site training is the key to reducing disruption and minimising lost time for employers. It also allows Leading Edge to apply specific training and advice to incorporate the basic concepts, to ensure the candidates understand the theory and practical elements of the course. By running the training at your yard it also resolves equipment selection, use and suitability issues.

Plant and Machinery Fall Arrest Training course programme - Theory

The theory part of the course is plant and machinery specific focusing on the access sequence requirements and restrictions, advising on temporary methods of work based on height requirements specific to the machine.

Course introduction

Statistics / safety awareness

Group exercise - harness workshop

Specific safety considerations for plant and machinery

Suitability of height safety equipment for the use with plant

Basic elements - Safe working procedures, equipment principles / operator considerations:

• Harnesses
• Inertia reels
• Lanyards
• Restraint equipment
• Lifelines
• Connectors
• Fixed systems

Methodology - working in fall arrest / work positioning / restraint, the specific suitability of each method of working and giving consideration to equipment requirements and restrictions

Anchorage - propriety devices, considering application suitability and access required for plant and machinery

Group exercise - inspection & care of kit workshop

Multi question examination paper

Photo ID

Plant and Machinery Course Programme - Practical

The candidates will then be taken on-site for practical training and experience while we evaluate each individual's capabilities. This practical assessment will also allow candidates to voice any concerns or issues they may have about their working environment and the equipment they use. Our experienced instructors work closely with your operatives to provide you with accurate, safe 'on the job' solutions.

Group informal risk assessment

Method of work and access

Equipment selection

Anchorage considerations, location and set up

Practical safe working training

Group exercises - practice and evaluation

Instructor live guidance - walkabout - review of site issues

After the course delegates will be able to work safely at height on plant and machinery. They will have a sound theory of the dangers and awareness of the risks when working at height, and have the practical skills in using the appropriate height safety equipment correctly and safely. The candidates having passed the course exam will be certificated competent to work safely at height on plant and machinery.

On successful completion of the course and examination, candidates will be issued with a Leading Edge Photo ID licence card and certification as proof of their competence and safety awareness.

Plant and Machinery Fall Arrest Training Group Booking Information

Location

Our training is plant or machinery specific and so in order to provide the most effective training we deliver courses at your chosen location where the equipment is located. Leading Edge provide direct training both nationwide and internationally, so wherever you are, we can deliver the training courses you need.

Duration - ½ Day (8.30am to 1pm)

Our courses last half a day to ensure candidates receive excellent training and practical assessments. Because our training is held at your work place it will minimise disruption and travelling times so you can maintain your workplace schedule.

Working at Height Training Pricing

*Course fees include the travel costs for England and Wales only; for all courses outside of this area there will be additional travel costs as appropriate.

Please call 01329 827 997 for next available dates or email: shirley@leadingedgesafety.co.uk

As a valued customer of Leading Edge we want to ensure our services meet and exceed all of your expectations and provide you with 100% satisfaction.

With this in mind, we’ve thought about how we can make a real difference for you to provide peace of mind when it comes to height safety. We have developed a free “Height Safety Service Pack” to ensure you get the best support and care available at site level with absolutely no extra cost to you.