Pro Aerial Bucket tool bag in black and orange with large external pockets, anchorage strap and tethering points.
Pro Aerial Bucket tool bag in black and orange with large external pockets, anchorage strap and tethering points.
Aerial Bucket tool bag in black and orange with large external pockets, anchorage strap and tethering points.
Aerial Bucket tool bag in black

Aerial Bucket

SKU: TB-AERIAL-D
WLL: 25 kg

£0.00

The Aerial Bucket is a maximum safety advancement to a traditional canvas bag, for people who work at height in suspension. It is designed to haul materials and tools at height and keep them hanging next to you while you work.

SKU Size Quantity
TB-AERIAL-D Single
SKU: TB-AERIAL-D Categories: ,

The Aerial Bucket is a maximum safety advancement to a traditional canvas bag, for people who work at height in suspension. It is designed to haul materials and tools at height and keep them hanging next to you while you work. A reinforced rim prevents the bag from collapsing in on itself and evenly distributes loading to protect side seams. The base of the bucket cannot be punctured because it is made from a single folded panel of multi- layer mesh with no joins or seams. It is also strengthened by the structural reinforced strap, forming a continuous loop around the body.

• Lifting/Anchorage strap
• 4 x D-ring tethering points

Volume: 33L / Height: 42cm / Width: 28cm / Depth: 28cm / Weight: 1.4Kg

WLL 25kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.