LV Pig Bucket tool and material bag in orange.
LV Pig Bucket tool and material bag in orange.
LV Pig Bucket tool and material bag in orange.
LV Pig Bucket tool and material bag in orange.

LV Pig Bucket

SKU: TB-LVPIG
WLL: 25 kg

£0.00

The LV Pig Bucket is a tool and materials bucket specially developed for live voltage applications.

SKU Size Quantity
TB-LVPIG-D N/A
TB-LVPIG-D-CS N/A
SKU: TB-LVPIG Categories: ,

The LV Pig Bucket is a tool and materials bucket specially developed for live voltage applications. It is intrinsically safe, meaning there are no metal components. Instead, it is made from incredibly robust multi-layer mesh with pro-static multi-braid rope tethering points that are encapsulated in synthetic sleeving. The additional benefits are increased internal visibility, better drainage and a 25% reduction in overall weight when compared to a standard Pig Bucket. An optional drawstring closure system protects your contents from bad weather and spillage.

• Intrinsically safe
• Breathable
• High visibility
• Lifting/Carry strap
• Lightweight
• 8 x D-ring tethering points

Volume: 19L / Height: 36cm / Diameter: Ø 26cm / Weight: 725G
WLL 25kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.