Pro large black tool bag with orange strap used to carry tools at height - Pro Pig Bucket
Pro pig Bucket tool bag in black with orange strap for working safely at height
Pro pig Bucket tool bag in black for working safely at height
Pig Bucket tool bag in black with orange strap for working safely at height

Pro Pig Bucket

SKU: TB-PIG-PRO
WLL: 45 kg

£0.00

The Pro Pig Bucket is an advanced dual-purpose lifting bucket. Not only does the cylindrical design make it perfect for hauling items to your place of work, the shoulder strap and multiple external pockets with dedicated tethering points make it a great personal tool tethering bag too.

SKU Type Quantity
TB-PIG-PRO-D Standard
TB-PIG-PRO-D-CS Drawstring Closure
SKU: TB-PIG-PRO Categories: ,

The Pro Pig Bucket is an advanced dual-purpose lifting bucket. Not only does the cylindrical design make it perfect for hauling items to your place of work, but the shoulder strap and multiple external pockets with dedicated tethering points make it a great personal tool tethering bag too. It has a reinforced rim to prevent collapse and provides greater internal capacity for a combination of both tools and materials. An optional drawstring closure system protects your contents from bad weather and spillage.

• Lifting/Carry strap
• Detachable shoulder strap
• Multiple external pockets
• 12 x D-ring tethering points

Volume: 21L / Height: 34cm / Diameter: Ø 28cm / Weight: 1.47Kg
WLL 45kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.